Fixing roller blinds to upvc windows

If internal recess fitting avoid drilling in to the PVC. You might want to consider fitting a batten to the upper side and fix your roller to this.

Best regards. The blind calls "Perfect Fit blind". There is view kind of them. They are fitted directly to the window frame without any damage and no need to drill even one hole in the window frame.

You can get them as a Venetian blind, Pleated blind, Roller in choice of s of fabric. If you go for standard Venetian than you should go for side fix. If you go for standard roller than rather top fix because the bracket for rollers are bend to 90 degrees. There is no wall with have exactly 90 degrees in top corner window recess so if you go for side fix than most brackets come of a bit from the top and it will effect the cosmetic look. If you find out that there is a metal on the top of window recess pre-drill using masonry drill when you rich the metal use self-drive screws or use drill for metal approx 3mm and go trough metal, it is usually only 2mm thick than use 4mm screws.

Strong fitting when you fix into metal, great when your window is really wide. Drill or nail the holes where you marked. Attach each bracket with screws, and open the brackets. Can roller blinds be fitted to uPVC windows? When it comes to Perfect Fit Venetian Blinds, they are designed to be neatly attached to a UPVC window frame without any need for drilling holes or screws. Instead, they use brackets that vanish out of sight once the blind itself has been installed.

What are self drilling screws? The drill point looks a lot like the point of a drill. It will drill a hole and form the mating threads in one operation.

If a screw will drill its own hole it is a Self-Drilling Screw. Can I screw into window frame? Short answer yes. Can you put blinds on a door? Though a door may limit the way you install your blinds, it's not impossible. You can't use an outside mount since it will restrict the door's movement, and you can't install an inside mount on the door since most doors do not have enough space, but you can install an outside mount-type style on the door itself.

I have mine attached to upvc. Self-tapping screws are typically used to secure wood, plastic, metal and brick together. There are two types of self-tapping screws, thread-forming and thread-cutting. Thread-forming: Before you can use these screws you will need to drill a pilot hole as the screw itself does not contain a pointed tip. You can drive machine screws into plastic, but first you must cut threads into the material. For this you need a tap the size of the fastener and a tap wrench.

Drill a pilot hole in the material. Drill screws into your UPVC window frame to secure the brackets 4. Before you get started on fitting, it's important to make sure you have the right tools for the job. Get these together before you start. Include a drill along with a 3mm drill bit, a tape measure, a spirit level, and a pencil or pen to mark on the UPVC.

All the screws and brackets will be included with your blinds. Step-by-step guide to fitting blinds on UPVC windows. Before you start fitting, double-check your window for obstructions.

Window handles and levers can prevent blinds from hanging flat or running smoothly.